English | MP4 | AVC 1280×720 | AAC 48KHz 2ch | 1h 14m | 226 MB
Get a broad overview of how wireless networks operate and walk through the steps of setting one up with instructor Kevin Wallace. Kevin discusses wireless LAN design options, wireless standards and security, and more. Kevin also demonstrates how to set up two different types of wireless networks—one using a common consumer-grade router and the other using professional-grade hardware.
Topics include:
- Wireless LAN design
- Autonomous vs. lightweight access points
- Selecting Wi-Fi channels
- 2.4 GHz and 5 GHz channels
- IEEE Wi-Fi standards
- Installing an autonomous access point
- Installing a lightweight access point
Table of Contents
1 Welcome to wireless networking
2 What you should know
3 Ad hoc wireless LAN
4 Infrastructure wireless LAN
5 Mesh wireless LAN
6 Autonomous vs. Lightweight Access Points
7 GHz channels
8 GHz channels
9 Independent Basic Service Set (IBSS)
10 Service Set ID (SSID)
11 Basic Service Set ID (BSSID)
12 Extended Service Set ID (ESSID)
13 Multiple Basic Service Set ID (MBSSID)
14 Direct-Sequence Spread Spectrum (DSSS)
15 Frequency Division Multiplexing (FDM)
16 Orthogonal Frequency Division Multiplexing (OFDM)
17 Quadrature Amplitude Modulation (QAM)
18 Channel bonding
19 Beamforming
20 MU-MIMO
21 Orthogonal Frequency Division Multiple Access (OFDMA)
22 IEEE 802.11n (Wi-Fi 4)
23 IEEE 802.11ac (Wi-Fi 5)
24 IEEE 802.11ax (Wi-Fi 6)
25 The need for wireless security
26 Wired Equivalent Privacy (WEP)
27 Key distribution modes
28 Enhanced encryption protocols
29 Enhanced security protocols
30 Linksys wireless router setup
31 Configuring channels
32 Configuring security
33 Ubiquiti UniFi Controller installation
34 Adding APs
35 Configuring channels
36 Configuring security
37 Review and next steps
Resolve the captcha to access the links!