RHCE Cert Prep: iSCSI Storage Area Networks

RHCE Cert Prep: iSCSI Storage Area Networks
RHCE Cert Prep: iSCSI Storage Area Networks

English | MP4 | AVC 1280×720 | AAC 44KHz 2ch | 1h 24m | 200 MB
eLearning | Skill level: Advanced

Become a Red Hat Certified Engineer (RHCE). The RHCE certification demonstrates expert-level competence with Red Hat Enterprise Linux and is considered the benchmark for Linux administrators. This course covers objectives related to iSCSI—the standard protocol for linking a storage area network (SAN) on Linux. Instructor Grant McWilliams provides an overview of iSCSI and related terminology, including targets, initiators, LUNs, backstores, and iSCSI addressing. He shows how to configure iSCSI target and initiator packages, create a backstore, enable access with an access control list (ACL), discover and log into targets, partition and format target drives, and prepare them for automatic mounting. Finally, he demonstrates how to remove targets and backstores and configure iSCSI LUN (logical unit number) storage.

Topics include:

  • What is iSCSI?
  • Creating iSCSI backstores
  • Configuring ACL and firewall credentials
  • Configuring targets and initiators
  • Partitioning and mounting drives
  • Creating iSCSI LUNs
+ Table of Contents

1 Welcome
2 What you need
3 OS installation
4 Lab setup
5 Configure VM settings
6 Install Guest Additions

Introduction to iSCSI
7 iSCSI terminology
8 iSCSI overview
9 Install and set up iSCSI packages
10 iSCSI addressing
11 Introduction to targetcli

Configure iSCSI Target and Initiator
12 Create iSCSI backstores
13 Create an iSCSI target
14 Create logical unit number
15 Configure access control lists
16 Configure Firewalld
17 Create an iSCSI initiator
18 Partition and mount by UUID

Manage Targets
19 Remove a device from a target
20 Add drives to the target
21 Create a disk-based iSCSI LUN
22 Create an LVM based iSCSI LUN
23 Create a RAMDISK based iSCSI LUN

24 Next steps

Download from Turbobit

Download from DepositFiles

Download from Rapidgator